Wednesday, December 14, 2011

Paint Clean Up & Removal - The Trifecta for Stripping Paint from Hard Surfaces

Paint Removal Using Boom Lifts by ACME POWERWASH
Removing paint from concrete, pavers and other hard surfaces can be a daunting task. While the old adage is true (and a little disturbing) that there is "more than one way to skin a cat", we have found that the following method has proven successful time and time again for paint removal. There are three elements required to achieve the best results: PRESSURE, HEAT, and CHEMICALS.

1. PRESSURE. Anyone that has ever used a paint scraper to scrape old paint off a concrete floor knows the amount of "pressure" required to remove old paint. A pressure washer with the right tip can make the job much easier and requires much less elbow grease. A pressure washer in the 3,000 - 4,000 psi range should do the trick. Avoid 0° nozzles and opt for a "fan" tip which will spread the pressure out over a greater area. These tips will help lift off the paint without pitting out the concrete surface or causing the "snail trails" caused by 0° tips.

2. HEAT. Pressure washing with hot water is essential for paint removal. Industrial pressure washers are capable of generating hot water and steam up to 330°F. Cleaning just about anything is easier with heat, and paint is no exception. As old, dried paint starts to heat up, it physically changes as the chemical bonds holding it together begin to breakdown. Heat makes paint expand and loosen up, which makes it easier to remove with PRESSURE.

3. CHEMICALS. For many paint removal projects, high-pressure steam and hot water may not be enough to adequately remove all paint. Chemical strippers can be employed to help break down the chemical elements of paints. Paint strippers and graffiti removers are available at local hardware shops and industrial supply stores. They are available in both liquid and gel formulations for application to horizontal and vertical surfaces. There are even soy-based, eco-friendly strippers available for "green" projects. One of the biggest drawbacks to using chemicals is that they can be expensive. However, they can save valuable time and energy when used properly making it even easier to remove paint with PRESSURE and HEAT!

It may be possible to remove paint without each item in this trifecta, but where you lack in one element you will need to increase another. For instance, many homeowners don't have the luxury of a hot-water pressure washer so they will need to use more (expensive) chemicals to achieve better results. Increasing the pressure too much may lead to costly damage and should be avoided. If in doubt, consider hiring a local, professional power washing service to complete your paint removal project. Just verify that they are using PRESSURE, HEAT, and CHEMICALS!

ACME Powerwash is a mobile pressure washing company serving residents and businesses in the Phoenix Metro area and all of Central Arizona. Visit them online at http://www.acmepowerwash.com for more information about power washing services.

2 comments:

Harrisk said...

Amazing tips! This article furnishes a good amount of information on various techniques. removal

jelly andrews said...

The information shared is really useful. Thanks for sharing this one. Nice posting!